Picco .12 clutch problem

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Lee250

RC Newbie
Messages
2
Reaction score
0
Location
Hawaii
RC Driving Style
  1. Bashing
I got an rc10gt from a coworker with a still in box Picco .12r sg. I've found that the threaded portion is 1/4-28. I've measured the shaft where the clutch bell would go and it's .195 and the bell is .313. Where would I get bearing to fit that? How else could I mount the clutch bell? Is there a shaft with a 1/4-28 that I could use if I cut the shaft? The factory #7603 clutch nut is too small to thread on.
 
Here is a pic. Nut on the left is the 1/4-28 the other 2 are the factory cut off nut and clutch nut
20150531_155350_zpsrxmsbb1w.jpg
[/URL][/IMG]

a>


<a href="http://s781.photobucket.com/user/toycamry1/media/20150531_155350_zpsrxmsbb1w.jpg.html" target="_blank"><img src="http://i781.photobucket.com/albums/yy100/toycamry1/20150531_155350_zpsrxmsbb1w.jpg" border="0" alt=" photo 20150531_155350_zpsrxmsbb1w.jpg"/></a>

now it works. the directions are when using their special cut off nut. The shaft on this engine is to big to use those nuts.
 
Back
Top