big idea for a masive joined double engine with a four piston setup need tips

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

mrmagooduz2

RC Newbie
Messages
1
Reaction score
0
need help and tips for a fisrt of its kind twin joined twin fuel injected nitro engine for rc trucks or cars or
 
Are you planning on machining something? What kind of skill's do you have?
 
This sounds ridiculously AWESOME but would require lot's of specialist skills and machines- the best way would be to get four engines and connect the crankshaft together, you'd also need to get each engine running at the same rpm, and would need a way of joining the carbs, as having four different carbs to tune would be right pain...
 
There are people that have run 2 engines side by side.
 
there have been dozens of people with this notion to come through this forum over the past few years. Most post just like above, and never return. I dont think there will ever be a hobbiest built multi-cylinder nitro motor built.
 
there have been dozens of people with this notion to come through this forum over the past few years. Most post just like above, and never return. I dont think there will ever be a hobbiest built multi-cylinder nitro motor built.

I believe I can make my own nitro fuel by mixing straight gasoline and castor oil along with some rubbing alcohol. Can you point me in the right direction? :rolleyes:
 
If it is not functioning properly you need to add some KY for extra lubrication.
 
That explains the dryness thanks. :D
 
Too granulated. Gonna rub it raw.
 
big idea for a masive joined double engine with a four piston setup need tips
need help and tips for a fisrt of its kind twin joined twin fuel injected nitro engine for rc trucks or cars

Which twin engines are you looking to join together? I know Sirio developed a V Twin prototype years ago but it never went into production.
normal_toyfair2008-Day2-332.jpg
 
Which twin engines are you looking to join together? I know Sirio developed a V Twin prototype years ago but it never went into production.
normal_toyfair2008-Day2-332.jpg
I've seen that picture so many times, yet there's no videos of it running- It would sound pretty cool too I imagine.
 
I've seen that picture so many times, yet there's no videos of it running- It would sound pretty cool too I imagine.
I wanted one of those V Twins in the worst way, just for the cool factor. Never came to fruition though, maybe it was prone to breakage or something.
 
I wanted one of those V Twins in the worst way, just for the cool factor. Never came to fruition though, maybe it was prone to breakage or something.
Same, it'd be totally unnecessary for most vehicles, but maybe in monster trucks when you want that extra torque.
 
I believe I can make my own nitro fuel by mixing straight gasoline and castor oil along with some rubbing alcohol. Can you point me in the right direction? :rolleyes:

I've got some fuel here that is designed for nitro engines with turbines. It's made from a very special blend of sheep urine, Hydrogen Peroxide and 2% Koala Saliva. I'm sure it would run well in that 4 cylinder.
 
I've got some fuel here that is designed for nitro engines with turbines. It's made from a very special blend of sheep urine, Hydrogen Peroxide and 2% Koala Saliva. I'm sure it would run well in that 4 cylinder.
you forgot the Ardvark oil...
 
Back
Top