Fried One
RC Newbie
- Messages
- 12
- Reaction score
- 8
Hi Guys,
I'm a little baffled . I replaced the stock wheels on my Lasernut U4. Bought a set of 2.2 aluminum wheels and using a 20mm hub extension to obtain clearance. Was pretty excited to get them installed but once installed and nuts tightened the wheels would not spin . It seems that the locking nut needs to be loosend quite a bit before it moves. I am a bit puzzled as to why it won't move when tightend. Has anyone come across this. I could really use some insight on this .
Thanks.
I'm a little baffled . I replaced the stock wheels on my Lasernut U4. Bought a set of 2.2 aluminum wheels and using a 20mm hub extension to obtain clearance. Was pretty excited to get them installed but once installed and nuts tightened the wheels would not spin . It seems that the locking nut needs to be loosend quite a bit before it moves. I am a bit puzzled as to why it won't move when tightend. Has anyone come across this. I could really use some insight on this .
Thanks.