Air leak problems on the Dynamite Mach 2 .21

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

MyREVOis2fst

RCTalk Member
Messages
29
Reaction score
0
RC Driving Style
  1. Bashing
  2. Racing
Hi guys, i have a Dynamite mach 2 engine in my revo 3.3 and its a pain in the freakin butt. I've never ran into a problem like this before and I am looking for things that i can seal/check that are easier to get to than the whole nine yards on resealing the engine. I've got the revo completely apart and all the nitro parts are off. i thought about converting it to electric but as of five seconds ago i decided to give it another try. thanks:\:\:\:\
 
Anywhere where air has an opportunity to get in or escape the engine. Usually the backplate, carb body and screw and the hsn nipple are your most problematic areas. Also make sure you use a high quality sealant
 
Funny you say that as I just replaced the backplate on the engine, that might be the problem as there was no air leak before I replaced it. Thanks for the help
 
Back
Top