You're currently viewing the thread: Vspec ebmods p/s

smb64 · #1 7-07-2009, 8:52 PM

Hey, I need to rebuild my v-spec eb-mod'd and I cant find any of the eb mods sleeves or anything. I am going to put the regular v-spec rod and p/s set up. That should work right? Thanks guys.

smb64 · #2 7-07-2009, 10:01 PM

Help plz =]

frickenjoey · #3 7-07-2009, 10:18 PM

I don't think you can buy the EB mod sleeves. I could be wrong though. If you need it to be a hotter engine than the standard V-spec you can always get it modded. There are a lot of professionals that do it other than EB. I know AB mods are pretty good. You could contact him and see what he can do with a standard V-spec.

smb64 · #4 7-07-2009, 11:35 PM

Yeah. It's more power than i need. I am just asking if it alright if i got back to the old p/s set up and old rod set up. but im still using the ebmods crank. Am I going to run into any issues? I don't think I would but I want to make sure.

frickenjoey · #5 7-08-2009, 2:01 AM

As long as the case and crank are the same you should not have any problems.

d8 rider · #6 8-04-2009, 7:24 AM

somone told me the os speed peston and sleev well fits on the spec

smb64 · #7 8-07-2009, 1:32 AM

I just put the ninja p/s in it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to rewind the 2.5 P/S	Domination	Traxxas T-Maxx	17	10-19-2009 12:21 AM
my vspec reach about 250!	pissant	1/8th scale Buggy	16	6-11-2005 11:08 PM
OS VZ-b Vspec? Anyone heard of a American Release?	bubba5353	1/8th scale Buggy	0	4-07-2004 12:54 PM
EBMods .26 Takes 2nd place at Dirt Oval Nationals	RobH	RC Engines and Motors	32	1-04-2004 11:07 PM

You're currently viewing the thread: Vspec ebmods p/s

Located in the 1/8th scale Buggy forum.