Mini-T slipper and differental adjustments

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

Register Log in
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
C

civicclutchh22

RCTalk Rookie
Messages
24
Reaction score
0
Location
stillwater
RC Driving Style
I have a Mini-T with a Baja engine and i have upgraded to the dual pad slipper and got a ball bearing differental but i dont know how and why to adjust them.i jsut have them set at what they were set to as in the intructions,but could some1 help me and tell me when i would want to adjust the 2.
 
does ur mini-t "click" when you press the trigger or a burst of sudden acceleration, my neighbors does
 
I will try to help you... I keep my slipper about 1/4 - 1/2 from being tighten all the way. As for the diff I have never been able to keep one hole. I have been told that you should be able to spin the wheel and the other wheel should spin the other way. Not sure if it is the same but on the XXX-NT you can check the setting of the diff by holding one tire, and the spur gear. Then take the one wheel you are not holding and try to spin it. IT should be VERY hard to spin.
 

Similar threads

Out4lox
Follow up to Prior Revo Thread—Slipper Clutch Adjustment in Revo 3.3 Tekno Electric Conversion
Replies
0
Views
896
Out4lox
Out4lox
majin
i got an scx24!! YEET
2
Replies
31
Views
719
J’sCrawler
J’sCrawler
lambdapriest
I really want to build up a BRUSHED Mini-Z to run in 2wd Mod...
Replies
6
Views
832
lambdapriest
lambdapriest
jojobeans
Rustler 2wd carpet racing tuning tips
Replies
10
Views
502
bill_delong
bill_delong
DavidB1126
First Mini B race! And other track news!
Replies
11
Views
2K
DavidB1126
DavidB1126
Back
Top