First run with 250cc tank

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

jetmechG550

RCTalk VIP
Messages
6,210
Reaction score
2
Location
Plainfield
RC Driving Style
Had our first run at the newly reconfigured track this weekend. Used the 250cc tank and was rather pleased. I could run the whole 5 minute practice and then 5 minute heat and not have to top off. Temps were great and it would come off with about 1/3 left in the tank. Ran the 15 minute main on one tank, she came off almost totally dry and the temp was a little high. So there is a leaning issue with less than 1/3 tank. Going to try and adjust some with a little longer pressure line and see if that will help. I ended up 3rd but had the same guy hit me no less than 6 times where I had to be marshalled and then he parked on top of me 3 times to where I couldn't get out. Oh well it was fun!
 
Are you running two servo's or did you opt for the single conversion?
 
Glad you had a good time Jet...That's what it's all about. Keep us posted on the lean issue.
 
Back
Top