Mayhem setup?

[GGASMAN]

ok guys here is my setup for my mayhem, tell me if it sounds right. i am new to 1/8. i always ran standium trucks.

front
-1 camber
shocks top- lower outside hole
bottom - outerhole
40wt - stock black springs
arms level

rear
-1 camber
shocks top-lower outside hole
bottom - middle hole
40wt- stock black springs
arms level

diffs-5-5-1

[vbgagnon]

This was the only setup I could find from a factory driver. He was leading his a-maine until sombody hit him and broke the car.

FRONT;
DIFF 5000
SHOCKS 70WT STOCK PISTONS
RED SPRINGS
OPTION FRONT TOWER MID HOLE
OUT ON THE ARM
UPPER ARMS MOVED FORWARD .080
OPTION ACKERMAN PLATE REAR HOLES

CENTER;
DIFF 7000
STOCK BRAKES

REAR;
DIFF 2000
SHOCKS 50WT RED SPRINGS STOCK PISTONS
STOCK REAR TOWER UPPER MIDDLE HOLE
IN ON THE ARM
1 1/2 OPTION ANTI SQUAT SHIMS
3 DEG TOE
HUBS CENTER

HIGH BITE TRACK RUNNING C-SWITCHES