Go Back   RCNitroTalk > R/C Forums > 1/8th scale Buggy


You're currently viewing the thread: I'm such an idiot....

Located in the 1/8th scale Buggy forum.


Thread Tools
  #1  
Old 4-18-2005, 12:39 AM
emu67
Status: Offline
RCNT Racer
 
Join Date: Mar 2005
Posts per Day: 0.08
Trader Feedback: (0)
I'm such an idiot....

Ok - so I got the Mayhem broken in. I set the needles at home, rich..., figuring I can tune for speed when I get to the track.

I get to the track, with about 45 minutes of light. I'm in a hurry, start it up and drive around for a couple of minutes. I figure I may as well tune for speed. Well, I'm in a hurry, it's getting dark, the buggy got dirty....and I get frustrated, moving the needles too much and not letting enough time go by to see if my settings are good.

Bottom line? Didn't run the buggy that well. It kept on stalling. I got frustrated and went home. That's what I get for not taking my time when I should have.

Next day, I tune it at home. I'm calm. Everything tunes just right in 5 minutes. Go figure

Boy, when you guys say to take your time with a new engine, and be patient, you sure weren't kidding. Lesson learned....downside is that I need to travel for work for a week and then I go on vacation the week after. I can't run my new Mayhem for the next two weeks! I ruined my only chance to run it at the track by being impatient!
Reply With Quote


Alt Today
Advertising  
Register your free account today
to remove this box!
Standard Sponsored Links

  #2  
Old 4-18-2005, 1:00 AM
JESSE G
Status: Offline
Hardcore RCNT User
 
Join Date: Nov 2004
Posts per Day: 1.31
Trader Feedback: (3)
Dont be so hard on yourself , at least you learned from your mistakes, I would be anxtious too if I had a new rc lol. To bad the motor diddnt come from the factory broken in already so all you had to do was to take it out of the box and go do some bashing!!!
Reply With Quote


  #3  
Old 4-18-2005, 1:27 AM
Diver6127
Status: Offline
Hardcore RCNT User
 
Join Date: Sep 2003
Posts per Day: 2.23
Trader Feedback: (6)
Be patient? What's that?!? Don't worry, we've all done that before. What happened to me was I was all excited to run my Schumacher Fusion21 last year and I couldn't wait for the track to be open. Needless to say, I ran in the parking lot while the track was being set up and I got a rock stuck in my belt. I frayed the belt (only has one) and the strands wrapped around the diff pulley's (both front and back). Locked everything up! Took me almost an hour to get everything free. Still ruined the pulley's by wearing a groove in it.

I don't have it anymore but I hope the guy I sold it to has patience. It's a monster!
Reply With Quote


  #4  
Old 4-18-2005, 1:33 AM
FastEddy's Avatar
FastEddy
Status: Offline
The Slowest Guy In Town
 
Join Date: Jul 2002
Location: Petaluma, CA
Posts per Day: 5.60
Experience: I own or work for a RC business
Trader Feedback: (40)
Sounds like my first 2 years of nitro.
Youll get it sooner or later. Dont stop now.
__________________


RC Screw Kits, Bearings, tools and other great stuff. www.TeamFastEddy.com
Reply With Quote


  #5  
Old 4-18-2005, 1:43 AM
Buggyracer28
Status: Offline
Hardcore RCNT User
 
Join Date: Jun 2004
Location: Portland
Posts per Day: 1.61
Trader Feedback: (5)
Hey.. at least you got some run time with it... It would be even worse if the engine wouldn't start the whole time at the track. You gotta look at the bright side of things. And you get to go on vacation! im sure you'll have fun without your car for a week or so. Im all excited to get my rc10gt, but i still have to wait another week Im sure the next time you go to the track you'll have er' all tuned up and ready to go for the max time you are there that always feels good
Reply With Quote


  #6  
Old 4-18-2005, 1:47 AM
Diver6127
Status: Offline
Hardcore RCNT User
 
Join Date: Sep 2003
Posts per Day: 2.23
Trader Feedback: (6)
Your worst day running your r/c's is better than your best day at work!
Reply With Quote


Post Reply

Bookmarks



Thread Tools

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Idiot Award jmarzilli On-Road Touring 14 5-09-2005 11:47 AM
Another computer idiot question... Candyman General Chaos 25 2-15-2004 9:24 PM
Idiot factor Mondo Traxxas T-Maxx 1 8-25-2003 1:06 PM
Damnit! More problems...i'm such an idiot kwong2001 HPI Savage 2 7-08-2003 1:17 AM


All times are GMT -5. The time now is 2:52 AM.

Copyright © 2008-2009 RCNitroTalk, All Rights Reserved
Powered by vBulletin®, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Our Community
Latest Forums Topics
About RCNitroTalk
Need Help?
Page generated in 0.73802 seconds with 18 queries