racer rich
RCTalk Rookie
- Messages
- 23
- Reaction score
- 0
- RC Driving Style
I have well over a hundred brand new hop-up parts for the Trinity Reflex/Nitro G4 and Kyosho V-One R/RR/RRR. A lot of these parts were imported from Asia since you cannot get them in North America. IP denotates that it is still in the package. If it is not in the package, it is still new and never used. If parts were used, it will be noted. Here is the list:
TRINITY:
2 Ultra-Stiff Composite Front and Rear Suspension Sets IP
2 Ultra-Stiff Composite Front Knuckle and Rear Upright Sets IP
2 Ultra-Stiff Composite Rear Bulkhead and Bracket Set IP
2 Ultra-Stiff Composite Front Bulkhead Set IP
1 Graphite Upper Deck
2 Aluminum Chassis Stiffner and Side Mount Belt Tensioner
1 Aluminum Middle Belt Mount IP
1 Graphite Receiver Mount IP
1 Hardened Brake Disk IP
1 Front Carbon Stiffner IP
1 Lowered Aluminum Heatsink Engine Mounts
1 Aluminum Front Swaybar System
1 Lightened Aluminum 2-Speed
2 19t Hardened Pulleys IP
2 18t Hardened Pulleys IP
1 27t Hardened Pulley
1 Heatsink Engine Mount IP
1 One-Way Differential (used twice)
1 Solid Rear Axle (used twice)
1 Front Diff (used twice)
1 2nd pinion 22t IP
1 1st pinion 18t IP
1 Hardened Aluminum Turnbuckles IP
1 2 speed 1st gear 47t IP
1 2 speed 1st gear 48 tooth IP
1 2 speed 2nd tooth 45t IP
1 Hard Coated Aluminum Rear Turnbuckles IP
1 Aluminum Brake Lever Mount
2 Dual Rate Spring Sets IP
1 Lightened and Milled ALuminum Chassis
1 Double Thick Chassis IP
1 Foam Car Stand IP
2 Servo Saver Futaba IP
2 Delrin Shock Piston Set IP
1 SG Clutch Nut Conversion IP
1 Ultra Adjustable Aluminum Shock Tower
1 Rear Bulkhead and Bracket IP
2 Rear Arm Sets
2 Speed Transmission Parts
1 Complete Threaded Shock Sets (4 total, assembled and used)
1 Set Aluminum Hard Coated Turnbuckle Balls
2 Aluminum Hard Coated Long Pulley Shafts
2 Aluminum Hard Coated Short Pulley Shafts
1 Fuel Tank
1 Big Bash Bumper IP
Numerous Arm and Shock Shafts IP
1 Shock Spring Set
KAWAHARA:
1 Aluminum Brake Chassis Mount IP
1 Front Delrin Bumper IP
1 Flywheel and Heatsink Engine Mounts for Centax Clutch
1 Aluminum Rear wheel hexes for wide tires
1 Aluminum Front wheel hexes
1 Limited Slip Differential (assembled but never used)
RC MODEL:
3 Side Belts for 24t High Speed Pulley Conversion IP
4 Front/Rear Belts for 24t High Speed Pulley Conversion IP
3 Aluminum 24t pulleys IP
1 Aluminum Pulley Set IP
K-FACTORY:
2 Hard Composition Delrin Rear Differential Pulleys
ATLAS:
3 Sets Front Universal Drive Shafts IP
3 Sets Rear Universal Drive Shafts IP
TOMS (all Blue Anodized Aluminum):
1 Floating Bearing Mount IP
1 V-One RR Shock Tower IP
1 V-One RR Rear Upper Arms IP
1 Rear Body Mount IP
1 Body Mount Pins IP
TOP (Aluminum parts are gray anodized):
1 Graohite Lightened Radio Tray IP
1 Aluminum Roll Bar Set IP
1 Aluminum Rear Shock Tower IP
1 Graphite Front Bumper Plate IP
2 Aluminum Brake Stoppers IP
1 Front Graphite Body Plate IP
1 Pulley Spacer Set for 24t High Speed Pulley Conversion IP
2 Blue Convave Washer Set (30 total) IP
1 set 3mm blue aluminum locknuts IP
1 Front Aluminum One-Way IP
1 Polished Aluminum But Driver IP
1 Black Aluminum Fake Transponder
1 Blue Aluminum Fake Transponder
1 Graphite Rear Shock Tower with Aluminum Mount IP
2 Low Weight Round Air Filters IP
1 New Automatic Electric Bearing Cleaner
TOBEE CRAFT:
2 Lightened Blue Aluminum Mid Shafts
2 Lightened Blue Aluminum Front Shafts
SQUARE:
1 Blue Aluminum and Graphite Rear Body Mount IP
TAKE OFF:
2 Chassis Balance Weight Sets IP
OFNA:
2 Brick Ni-MH 1000 mah receiver packs
KYOSHO:
1 Pair Titanium Front Turnbuckles IP
1 Rear Swaybar Set IP
1 Shock Set (4 total shocks)
1 Aluminum 2 Speed Tool IP
1 Aluminum Centax Clutch Tool IP
1 Hard Anodized Aluminum Brake Holder IP
1 Rear Stabilzer Bar Set IP
2 Pairs of Titanium Shock Shafts IP
1 2 speed 1st gear 18t
1 2 speed 2nd gear 22t
1 Wide Bumper Set IP
1 Floating Rear Body Mount IP
3 Front Drive Belts IP
1 Rear Drive Belt IP
2 Differential Pulley Sets IP
1 Receiver Box Set IP
2 Rear Body Mount Post Sets IP
4 Packages assorted set screws IP
4 Packages assorted ball joints IP
3 Packages assorted ball studs IP
1 Aluminum Body Mount Post IP
1 Rubber Crystal Cap IP
1 Rear Upper Rods IP
Also, not pictured, I have numerous stock parts for the Trinity Reflex and Kyosho V-One R/RR/RRR. I originally had two Reflex kits, bulit one, kept the other for parts, rebuilt the car I built to install the hop-ups, but never got around to do it. I have the original Reflex Box and the manual as well.
All together, these parts come to well over $1500.00 new. Most of them are brand new and still in the package. Others are new and out of the package, and very few have been used at all. I would like to sell all these parts as a lot or at least in groups. Please don't ask to part out specific items---I just don't have the time for that. Make me an offer on the parts, I am very flexible. I would like to get around a third of what I paid for them when new. In other words, my asking price is around $450.00 to $500.00 including shipping. But as previously stated, all offers will be considered.
Please e-mail me if interested. Thanks!
TRINITY:
2 Ultra-Stiff Composite Front and Rear Suspension Sets IP
2 Ultra-Stiff Composite Front Knuckle and Rear Upright Sets IP
2 Ultra-Stiff Composite Rear Bulkhead and Bracket Set IP
2 Ultra-Stiff Composite Front Bulkhead Set IP
1 Graphite Upper Deck
2 Aluminum Chassis Stiffner and Side Mount Belt Tensioner
1 Aluminum Middle Belt Mount IP
1 Graphite Receiver Mount IP
1 Hardened Brake Disk IP
1 Front Carbon Stiffner IP
1 Lowered Aluminum Heatsink Engine Mounts
1 Aluminum Front Swaybar System
1 Lightened Aluminum 2-Speed
2 19t Hardened Pulleys IP
2 18t Hardened Pulleys IP
1 27t Hardened Pulley
1 Heatsink Engine Mount IP
1 One-Way Differential (used twice)
1 Solid Rear Axle (used twice)
1 Front Diff (used twice)
1 2nd pinion 22t IP
1 1st pinion 18t IP
1 Hardened Aluminum Turnbuckles IP
1 2 speed 1st gear 47t IP
1 2 speed 1st gear 48 tooth IP
1 2 speed 2nd tooth 45t IP
1 Hard Coated Aluminum Rear Turnbuckles IP
1 Aluminum Brake Lever Mount
2 Dual Rate Spring Sets IP
1 Lightened and Milled ALuminum Chassis
1 Double Thick Chassis IP
1 Foam Car Stand IP
2 Servo Saver Futaba IP
2 Delrin Shock Piston Set IP
1 SG Clutch Nut Conversion IP
1 Ultra Adjustable Aluminum Shock Tower
1 Rear Bulkhead and Bracket IP
2 Rear Arm Sets
2 Speed Transmission Parts
1 Complete Threaded Shock Sets (4 total, assembled and used)
1 Set Aluminum Hard Coated Turnbuckle Balls
2 Aluminum Hard Coated Long Pulley Shafts
2 Aluminum Hard Coated Short Pulley Shafts
1 Fuel Tank
1 Big Bash Bumper IP
Numerous Arm and Shock Shafts IP
1 Shock Spring Set
KAWAHARA:
1 Aluminum Brake Chassis Mount IP
1 Front Delrin Bumper IP
1 Flywheel and Heatsink Engine Mounts for Centax Clutch
1 Aluminum Rear wheel hexes for wide tires
1 Aluminum Front wheel hexes
1 Limited Slip Differential (assembled but never used)
RC MODEL:
3 Side Belts for 24t High Speed Pulley Conversion IP
4 Front/Rear Belts for 24t High Speed Pulley Conversion IP
3 Aluminum 24t pulleys IP
1 Aluminum Pulley Set IP
K-FACTORY:
2 Hard Composition Delrin Rear Differential Pulleys
ATLAS:
3 Sets Front Universal Drive Shafts IP
3 Sets Rear Universal Drive Shafts IP
TOMS (all Blue Anodized Aluminum):
1 Floating Bearing Mount IP
1 V-One RR Shock Tower IP
1 V-One RR Rear Upper Arms IP
1 Rear Body Mount IP
1 Body Mount Pins IP
TOP (Aluminum parts are gray anodized):
1 Graohite Lightened Radio Tray IP
1 Aluminum Roll Bar Set IP
1 Aluminum Rear Shock Tower IP
1 Graphite Front Bumper Plate IP
2 Aluminum Brake Stoppers IP
1 Front Graphite Body Plate IP
1 Pulley Spacer Set for 24t High Speed Pulley Conversion IP
2 Blue Convave Washer Set (30 total) IP
1 set 3mm blue aluminum locknuts IP
1 Front Aluminum One-Way IP
1 Polished Aluminum But Driver IP
1 Black Aluminum Fake Transponder
1 Blue Aluminum Fake Transponder
1 Graphite Rear Shock Tower with Aluminum Mount IP
2 Low Weight Round Air Filters IP
1 New Automatic Electric Bearing Cleaner
TOBEE CRAFT:
2 Lightened Blue Aluminum Mid Shafts
2 Lightened Blue Aluminum Front Shafts
SQUARE:
1 Blue Aluminum and Graphite Rear Body Mount IP
TAKE OFF:
2 Chassis Balance Weight Sets IP
OFNA:
2 Brick Ni-MH 1000 mah receiver packs
KYOSHO:
1 Pair Titanium Front Turnbuckles IP
1 Rear Swaybar Set IP
1 Shock Set (4 total shocks)
1 Aluminum 2 Speed Tool IP
1 Aluminum Centax Clutch Tool IP
1 Hard Anodized Aluminum Brake Holder IP
1 Rear Stabilzer Bar Set IP
2 Pairs of Titanium Shock Shafts IP
1 2 speed 1st gear 18t
1 2 speed 2nd gear 22t
1 Wide Bumper Set IP
1 Floating Rear Body Mount IP
3 Front Drive Belts IP
1 Rear Drive Belt IP
2 Differential Pulley Sets IP
1 Receiver Box Set IP
2 Rear Body Mount Post Sets IP
4 Packages assorted set screws IP
4 Packages assorted ball joints IP
3 Packages assorted ball studs IP
1 Aluminum Body Mount Post IP
1 Rubber Crystal Cap IP
1 Rear Upper Rods IP
Also, not pictured, I have numerous stock parts for the Trinity Reflex and Kyosho V-One R/RR/RRR. I originally had two Reflex kits, bulit one, kept the other for parts, rebuilt the car I built to install the hop-ups, but never got around to do it. I have the original Reflex Box and the manual as well.
All together, these parts come to well over $1500.00 new. Most of them are brand new and still in the package. Others are new and out of the package, and very few have been used at all. I would like to sell all these parts as a lot or at least in groups. Please don't ask to part out specific items---I just don't have the time for that. Make me an offer on the parts, I am very flexible. I would like to get around a third of what I paid for them when new. In other words, my asking price is around $450.00 to $500.00 including shipping. But as previously stated, all offers will be considered.
Please e-mail me if interested. Thanks!
Last edited:
