Mini Revo pics and mods.

[revo_rob_1984]

my merv is still pretty stock with the exception of the Duratrax heat sink and i upgraded the radio to my spektrum DX3S and thats it. . .i really didn't like the little thing on lipos, it never wanted to settle down so i got rid of all my lipo equipment and i am sticking with NiMh 2 batteries in series is enough for me

[JettaManDan]

Cool man...for me i can never have too much speed...i'm doing all LiPo now...

[revo_rob_1984]

Originally Posted by GILU812

For night runnin

Is that a premade light kit or did you put it together?????

[GILU812]

Got it from Ebay.....

[Drivinfast247]

I blew out my rear ring gear after over a month of bashing on 2S and 3S lipos. I was messing around in the leaf piles, and doing some tire spinning when it caught traction and did what looked like 3 backflips. I flip it back over and proceed to drive it and Im hearing a rather loud 'click' under heavy throttle. I checked over all the drive shafts and they look fine, so Im assuming its the ring and pinion. Im surprised it lasted this long to be honest. I picked up a new ring and pinion and need to get some fresh diff. lube. Does anybody know the stock oil weight?

[JettaManDan]

i hurt my 1st part today too...my drivers real axle driver (that holds the u joint) partially stripped out. Axle keps falling out. Thankfully the LHS actually had a set. Will be back in business tomorrow.

think it is 5k weight stock...i think?????

[Drivinfast247]

My diff. only had oil residue inside of it, almost completely dry. Im not sure if it leaked out or wasnt filled at the factory. Anyways I rebuilt it and filled it with 5K oil and sealed the screws with some blue RTV silicon. Its up and running very smooth. Im gonna take out the front diff. and fill and seal it as well.