The LMT is still going strong with the stock reinforced (with epoxy) axles (see first post). I was doing repeated four to six foot jumps yesterday and it landed on the front wheels hard a few times. Time will tell but so far this has been an easy and worthwhile modification. If it eventually...
If the pictures below I took the original RCmart stainless steel bumper mount and traced it onto 1/8” sheet aluminum. I then cut some 1/4” aluminum rod to the same length as the RCmart bumper rods, drilled them, and tapped them to accept the screw. The final touches were wet sanding them with...
@WickedFog Whereas before I could easily bend it at those points where you have arrows in your picture now I cannot. Its significantly stiffer than before. I've launched this thing 6 feet in the air and those axles are still whole.
Starting this thread to document some of the modifications I have done to my Losi LMT so that those that might acquire one and start looking for ideas might learn from this thread. Here are a few of the modifications that I feel are necessary and should be done right away to thwart off the...