Search results

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

  1. HPIguy

    SchrodeMode's Axial Wraith

    Good deal. I honestly think the only way you're going to get what you want is to throw the brushed motor in there. But hey, I could be wrong, it's happened once before. :D This is honestly the reason that I went with a two speed trans, and a sensored brushless setup so I could have the best of...
  2. HPIguy

    SchrodeMode's Axial Wraith

    Understood, I'd try gearing it way down if you can't adjust it out (you'll never get rid of it completely on a sensorless setup) in the software. Roughly 5 to 1 is a good starting point on gearing, they're known to be high geared stock, try 84/16. I think mine is 12/60 but I'm not running the...
  3. HPIguy

    SchrodeMode's Axial Wraith

    What's your gearing at currently? It shouldn't cog that bad I wouldn't think. After some research, it appears that some of the vanguard stuff is just rebadged Castle electronics. Check the firmware on your ESC, and see if there's an update for it. You can also play around with the punch control...
  4. HPIguy

    SchrodeMode's Axial Wraith

    That sucks, hate to hear that buddy. The only way brushless systems work well for crawling in to use a sensored setup, even then it's not quite as good as brushed. It's close enough for me, but my brushed rigs still have better low speed resolution on the throttle. Now if you're just bashing...
  5. HPIguy

    SchrodeMode's Axial Wraith

    All of my electronics save for the servo winch, and plug for my crawler dad lights are in Da Box, under Da Tray. I have the rear mount version, my battery is up front using a CKRC front battery mount kit. It seemed to allow for the use of bigger packs since it's just a flat plate rather than an...
  6. HPIguy

    SchrodeMode's Axial Wraith

    Yeah, I don't use internals for anything that's high amp draw, but I can do everything I need (servo, lights, etc) off of one CC BEC pro. My RX runs straight off my ESC, the BEC in it is way more than enough for the tiny draw a RX takes.
  7. HPIguy

    SchrodeMode's Axial Wraith

    ^^Are you saying you run three separate BECs?
  8. HPIguy

    SchrodeMode's Axial Wraith

    Looks good man. Those wheels will work with the Lattice Innovations Shift hubs that I run BTW.
  9. HPIguy

    SchrodeMode's Axial Wraith

    Schrode, I wish I had some advice on NiMh packs for you, but I just don't bother with them. Also, is it only LiPo that you're having trouble finding / getting shipped, or all Lithium based packs in general? The reason I ask is LiFe or Li-ion would both be more stable and consistent throughout...
Back
Top