Search results

So what kind of gearing and pipe would you suggest useing with an O.S. 18 on there and you are shotting for top speed? I am curttenly running the stock pipe with the stock 2 speed gearing on there with like I said the O.S. 18 engine what would you suggest doing differently to get this to go...

Has any one every heard of putting a 3 speed tranny on one? If so could you give me instructions on how it is done? And also provide and pics of this. Thanks alot

i already have the forward only conversion on there i am just needing a beefery tranny since i am going to be pulling

yes i checked my tank and it is ok i replaced and checked so i dont know where the leak is

no it keeps going up and up i had it a 300 one day and then i shut it off i was like that is just to hot to run this mill i even tried and richen it up and it just would not cool down for nothing so i kept it off for a while and let it cool down then i tried it again and it did the same thing...

the engine will heat up to about 250 in no time at all i guess that i will have to go back threw the engine check it again to make sure that i didnt miss a spot or should i just rebuild the sirio .18 and put on it

i went threw and put a little sealer around on the carbs and the heads to make sure that there was no leak and the carb is fine i have checked and also got a new one and rebuilt it could it have something to do with the porting and the polishing

there are no air leaks and the everything about it is good i have checked everything out and it is all right and the motor was new last year when i bought it then ported and poilshed it before i ever ran it so i dont know what the deal could be and i am not even running a body on it and also...

I have a ntc3 that has some hop ups and a ported and polished 0s .18 and i can not keep the damn mill from overheating can any one help me out this is really starting to bug me so i am thinking of rebuilding my sirio .18 and put on there since i finally found some bearings for it so give me some...

ok where do you think that i could find center diff for a tmaxx i have never heard of such a thing for a tmaxx if you could help me out that would be wonderful and di you even think that it is possible

ok i finally got pics of my truck up so check this link out and let me know what you think of it and yes that is a hpi 4.6 mill on there https://www.rcnitrotalk.com/gallery/showgallery.php/ppuser/8363

i am needing all meatal gears because of the motor that i have on my tmaxx and the application that i am going to be useing it for the application that i am going to be useing it for is a puller truck in competion and when i say pulling i mean pulling a sled so that is why i need all metal...

I am searching for a place that i can get all metal gear tranny and tranny housing does any one have a clue where i can find one that is already built the i can get thanks chris

I recently got a momba 8000 and installed it on my rc18t and now i am looking for a lipo that will be a good match for the mamba can any point me in the right direction on what size battery that i need and where i can find one and how much one is going to cost me my local hobby shop is being no...

well actuall i have rebuilt the truck three times know i had the stock and did a few hopups to then i broke it then i went all aluminum bad idea so know i have taken it and built it to where i can take it and throw it at a brick wall and it will not break so that is where i get the $7000...

money is not that much of a problem seeing how i have already spent 7000 on one truck (which this price was all materials at a discount) and am getting ready to build another truck to play with i would proably not want to spend more than 350 on a radio and i would perfer to have a very good...

What brand and stlye of pistol grip radio would you use for a tmaxx this is a tmaxx that i am going to be building from ground up and i was wanting a really good radio setup with servos i have heard something about wireless servos or something if so i would like to use those i may of just miss...

well i am needing a heavy duty one because i have a monster engine on my cyber maxx conversion i am useing the hpi 4.6 on it it is torque as hell and i am also gearing my clutch bell and spear gear for all torque so do you think that these would still work

yes they are twisting like candy canes and snaping loose everytime that i run like about 2 or 3 mins after i start running i need something to do because starting late spring the are going to be pulling competions and i am going to enter in them if i can get that solved

I have built my tmaxx to handle pretty much anything that is thrown at it but my center center diffs keep candy caning is there a solution to fix this problem i was wondering if there was a center cvd kit out there for a cyber maxx chassis and if so where can i go about getting them