you may use a pullstart with side exhaust but i would prefer tiger drive more.
but if you want to keep on replacing pullstarts then go with the pullstart, but IMO tiger drive is the best solution
i had the same problem in my revo. it was leaking from underneath the HSN.
i called traxxas today and they are sending one to me for free !
anyways its deff your carb. make sure your hsn is tightened, but dont overtighten or it will strip the thred on those cheap plastic carbs.
if you turned yr idle speed screw all the way in then your idle would be extremely high !
start your model and keep on turning the idle speed screw left until it the model turns off , when it turns of turn the idle speed screw right (1/8 turn).
also a way i adjust my lsn is: Whn you start...
The trinity is very loud. but if your looking for performance IMO i would go with the new silver polished traxxas resonater. Its a tuned pipe and it performs really great
i called traxxas support and they said to richen up my HSN.
but i dont understand.......
It has the power to go realy fast in first gear but then slows down, i really dont think its my tune, i think something's up with my tranny.
well time to go check it out !
Hey guys, My revo slows down when it hits second gear.
Like i give it gas and it goes fast in first gear and then slows down in second gear.
Any ideas what might of broke/happened ?
Well i really got into the whole 1/5 scale rc thing.
i got a baja 5b and 5t
now I'm looking for another 1/5 scale but i want it cheep.
any suggestions?
I would recommened byrons. It's way better than traxxas top fuel. When i used to use 20% traxxas top fuel power plus I got good results but hard tuning. I switched to byrons race gen2 30% fuel and i saw better performance easier tuning and it didnt stall as muhc as it used too.
Traxxas says...
UPDATE!!!! I soldered them back in yesterday and it didnt work. i tried it the other way around and it works.
So its
white
red
black
not
black
red
white
Hey everybody I bashed my revo last weekend at the sandput and the track in wolcott. I got home to go to the sandpit again and i was giving full throttle and the servo was twitching. I finally got some time today to take a look at it, i took it out and BAM! the cable was loose inside and when i...