Search results

Default setting is auto lipo so unless you changed it in castle link then you'll be good. Never hurts to hook it up to the castle link just to double check the settings.

I think those are based of the older team associated t3 stadium truck.

u can loosen the glow plug a lil to help start-then tighten it back up-i try to always use the heat gun to pre-warm the engine-new engines r always hard to start the first time-hair dryer works to-u can ditch the blue glow plug wire to and use a glow plug ignitor-ez start batt. will last much...

yes-do the foc conversion-will save some weight also-i hardly used reverse anyway 2-200 bucks can get u some nice stuff-rpm suspension arms r a good investment-like 40 bucks total for a complete set-the revo's pretty durable-u dont need much-I've heard of shock ends breaking to-i havent broke...

i just removed 40 series crime fighters from 40 series wabash rims-i used the boiling method-got um off ebay for cheap-but the idiot i bought um from opened up the air holes to like 1/2 inch wide-rocks and dirt took over inside-so i tryed boiling them-it worked but u gotta leave them in the...

i got a 2.5r w/ o.s .18tm-i run os lc3 plugs-this engine seems to like 250f to 280f-have to adjust the tuning way to rich to lower temps and runs like crap.i really like the o.s lc3 plug-since its made for the 18tm-been runnin same lc3 for a while.

i have a 2.5r w/o.s 18tm w/trinity hi-flow pipe-i used the stock coupler to connect um cause the trinity manifold wouldnt work w/o.s-make sure u tighten um w/ heavy duty zip ties-I've had no problems and will lift front wheels from a dead stop to a 4-6mph roll-will even lift um from a higher...

i have same prob right now-i took the tq2 outta my slash(my revo's foc 2.5r model). i run jr z650 steering servo and traxxas 2055 throttle servo(almost brand new). my throttle twitches when throttle position in neutral(no input). just barely twitches-for a few seconds then stops until i give...

revo fuel i like to stick to one brand-which i also run trinity monsterhorsepower 20%. if u switch tuning will be off alil and have to retune-not much-but i love trinity monster fuel 20%-I've had the same quart for a yr-i keep my fuel outaa the sun and stored in a cabinet-no fall off in...

def. running rich-close the hsn all the way and turn it out 4 turns-thats traxxas stock setting-the lsn should be flush with inner circle ring right around it-i find that setting alil to lean for my area.

fuel bubbling is normal-does the armor all trick really work? start at the clutch-i would take the motor out and check the clutch-use like a 400 grit sand paper and clean the inside of the clutchbell-and if the clutch is realy worn there will a nice amount of space between where they touch. if...

I'm from southeast bucks county and the only track I've been to is dc ultra trax-pretty far from where i used to live.

i run a integy 3 shoe aluminum clutch which includes a new flywheel and i run the stock clutchbell w/ a mip clutch spring. people will say integy is junk but i havent had any problems w/ their stuff.

rich settings will eventually blow it out-also lean will blow it out faster, i run a os lc3 plug with good results and have ran mccoy mc59-i like the os better

i used a revo battery pack(flat) w/ the revo on off switch and mounted it to the reciever box-u have to come up w/ a way to mount it-double sided tape-i used a spare piece of lexan and some longer screws mounted on the stock battery box tray.-it shows a pic in the monster truck section of the...

yeah check 4 leaks(backplate,carb body,tighten cooling head) there will be fuel on block if theres an air leak. i would also reset the needles on the carb to factory(4 turns out from closed on high speed needle)low speed should be alil rich which traxxas tells u to set it flush w/ the ring that...

yes-lessen told ya all u need to know about it.

i agree w/ brad-if your not gonna run it after cleaning then throw some after run oil in it-b/c I'm gonna assume theres some surface rust in the engine-the best bet is to tear down the motor and clean it-inspect those internal bearings cause if there rusty they can be hard to get back into...

good idea, but there have been r/c games b4-but they all pretty much sucked. but i like the idea of traxxas or hpi or other companys making games w/ just their products.

proline beadlock 2.2's look sick on that thing.