hamz9561
Proud Short Bus Rider
Supporter
Military Veteran
To clock the axles on the SCX-10/JK, I adjusted the length of the links to get the drive shaft angle correct.
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Alexander_0_1
"Roads, where we're going we don't need roads"
- Thread starter
- #22
Hey guys, I decided to commission a different light bucket for my ascender, originally the design was supposed to be a duplicate of the original ascender tailgate sticker, but without a licencing agreement this is what was struck. The last pic is where it'll be mounted right between my taillight lenses.
I had ordered a couple, so I could experiment with painting the lens, so only the letters show up. I'm not too sure how to suspend the lights in it though.
Here's a couple pics of the backside.
I had ordered a couple, so I could experiment with painting the lens, so only the letters show up. I'm not too sure how to suspend the lights in it though.
Here's a couple pics of the backside.
Last edited:
Alexander_0_1
"Roads, where we're going we don't need roads"
- Thread starter
- #23
Let me know what you guys think. I took the idea from an old ford F-150 I was following that had lit up lettering in the tailgate.
