team infinity mystery

[savage4.6]

my friend has a team infinity monster truck and we can't figure out how to secure the carbuerator to the engine. Seems like just a friction fit. Also dont even know what kind/model it is. Its at least 10 years old.

 

[HSP Mongrel Muggy]

my friend has a team infinity monster truck and we can't figure out how to secure the carbuerator to the engine. Seems like just a friction fit. Also dont even know what kind/model it is. Its at least 10 years old.

Most Engines have a screw that is tightened in a sleeve that has an indent so it pulls onto the body of the carb.. If its not an indented sleeve then it will be a screw with the same indentation and a nut on the end that works the same way. You slide the sleeve/screw in first making sure the indentations are lined up with the blocks opening for the carb, press the carb in, its meant to be a fairly tight fit, then you tighten the screw/nut to "pinch" the carby in place...

 

[griff7373]

but please do not over tighten it as it can crack the block that the carb rides in, it is usually just cast metal.