Proline-Racing has just released their newest 2.2″ tires, the Flat Iron! The flat iron tire has been designed for complete terrain diversity while maintaining a true rock crawling look. The tread on the Proline Flat Iron tires is spaced close enough together for street use and the large lug pattern combined with siping allows the tire to have the perfect amount of flex under throttle acceleration.
Click to continue »

Proline Racing has just released a new type of tire foam - soft memory foam!

The new Proline 2.2″ memory foam allows the tire to flex more over obstacles. Thus allowing your tire to work more efficiently and effectively. The Proline memory tire form also helps to maintain a more level chassis by absorbing these obstacles.
Click to continue »

Axial’s popular Axial 2.2 Rock Lizard Tires just got better. Now available in the softer stickier race compound, the Axial 2.2 Rock Lizard Tires (Race Compound) tires allow more flex and stick better to most surfaces.

Axial 2.2 Rock Lizard Tires (Race Compound) Features:

• Aggressive side bite for better traction in off camber situations
• Realistic looking tread pattern
• Center lug pattern has lots of surface bite
• Race Compound – Softer and stickier than stock compounds
• Inside diameter: 57mm
• Outside Diameter: 132mm
• Width: 56mm

This is the Andy Moore’s Much-More IC controlled tire warmer. The tire warmer come fashioned in a purple anodized aluminum case with a special black LCD display and with Andy Moore and Much-More’s logo on the case.
Part Number: MM-CTXWP

Much-More also has a Marc Rheinard edition as well also with Marc’s logo but in a blue anodized aluminum case.
Part Number: MM-CTXWB

The same technology and design that was used in the Hole Shot MTR tires for trucks has been carefully scaled in a 1:8 buggy version and is now available in Pro-Line’s competitive M2 and M3 compounds.

The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Proline Racing Hole Shot design has just about every title imaginable. Pro-Line’s development staff is proud to announce the 1:8 version and they are filled with anticipation of it’s debut at The Dirt Nitro Challenge, in Phoenix, AZ, at the Nitro Pit.

When you’re looking to add another weapon to your 1:8 buggy arsenal, check out the new Proline Racing Hole Shot 1:8 buggy tire.

Proline Racing Hole Shot Features

• Oversized inner ribs for anti-tire ballooning under acceleration
• Small pin design for use on hard-packed tracks
• A proven design in almost every off-road race category
• Made from super-soft M2 and ultra-soft M3 compounds

Part #: 9026-01 - M2 Compound
MSRP: $23.00

Part #: 9026-02 - M3 Compound
MSRP: $25.00

Discuss the new Pro-Line Racing Hole Shot tires in our 1/8th scale buggy forum.

Much-More has just releasted their new special carpet tire inserts, the MIA-CP! The Much-More MIA-CP is less elastic and lighter then most other tire inserts, making them more suitable for use on carpet. The Much Much MIA CP tire inserts also comes with powder to decrease the friction between the tire and insert keeping them stable inside and prevents the tire and insert from heating up.

Part #: MIA-CP

Discuss the new Much-More MIA CP tire inserts in the On-Road Touring forum.

Much-More has just put out two different versions of their new minimum odor tire conditioner called Blue Sap and Red Sap! Both Blue Sap and Red Sap tire conditioners have been specifically designed to provide the better grip for rubber tires on carpet tracks.

The blue sap provides better traction and more grip than the red sap and both can be applied just a few minutes before the race using the supplied brush!

Part #: MR-GBS Blue Sap (Rubber Tire Conditioner)
Part #: MR-GRS Red Sap (Rubber Tire Conditioner w/Brush)

Discuss Much-Mores new Sap Rubber Tire Conditioner in our On-Road Touring car forum.

If you’re into R/C Rock Crawling then the Axial 2.2 Rockster Rock Crawler Beadlocks are just what you have been looking for!

The Axial 2.2 Rockster is designed to fit the most popular rock crawler tires now out on the market, the Axial 2.2 Rockster beadlocks come ready to mount to any 2.2 rock crawler project you may have.

Click to continue »

The Cubes tire was created for medium packed track conditions, but works well on all surfaces. The blocks allow for great bite and are far enough apart to allow for good clean out in soft loamy conditions. They are sized to fit standard buggy wheels. Low profile sidewall reduces flex in, and is available in two compounds.

Click to continue »

The Proline Hole Shot MTR was developed after numerous requests for an all-around better handling tire on blue-groove and hard-packed-type tracks. In order to produce the best tire possible under these conditions, a narrower carcass than the MT tire was created along with a small-pin design. The smaller pins are less flexible than the Proline Crime Fighter making it a force to be reckoned with on hard-packed conditions. Additional features such as large inner ribbing reduce tire stretching under acceleration, the outer side pins on the Proline Hole Shot MTR tires are angled for greater corner speed and less rut catching, and inner sidewall ribbing was created to reduce side-to-side flex, thus insuring greater overall tire response and control. When you’re looking for an alternative tire for those hard-packed, blue-groove type surfaces, then check out Pro-Line’s all-new Hole Shot MTR for standard monster truck wheels.

Hole Shot MTR Features:

• Oversized inner ribs for anti tire ballooning under acceleration
• Small pin design for use on hard-packed tracks
• Inner sidewall ribbing for greater corner speed.
• Made from super-soft M2 material

Part #: 1133-00 - Hole Shot MTR Standard Size Tire
MSRP: $31.00/pr.

Get ready to tear up the track with the new Axial Terra-izer tires. The Axial Terra-izer and Terre-izer Oversized was designed using successful professional motocross tire tread concepts and successfully adapting them to the R/C Monster truck environment. The block pattern in the center of the tire is similar to what you might find on a pro racers motocross bike, while the side blocks have been optimized to provide constant traction even when the vehicle is at extreme lean angles and still allow forward bite to the racing surface. All this adds up to improved traction on medium packed track conditions.
Click to continue »