Axial AX10 Scorpion Almost Ready to Run

May 30, 2008 in Axial | Comments Off

Axial AX10 ARTR

Axial has just released another version of their ever popular Scorpion RC rock crawling truck, this time it’s an almost ready to run (ARTR) version. The Axial AX10 Scorpion ARTR was designed from the ground up, and every detail was thought through to provide a competition level base kit to work with. In the past the only way to build a competition capable rock crawler was to buy bits and pieces of several different kit. This long and sometimes frustrating process could take as long as several months just to get the right parts together before you could even start the build. Now you can get a factory built rolling chassis, and within approximately an hours build-time you’ll be able to hit the rocks with your competition ready AX10 Scorpion rock crawler.

Click to continue…

Axial XC-1 RC Rock Crawler Body

March 28, 2008 in Axial | no comments

Axial XC-1 RC Rock Crawler Body

The new Axial XC-1 rc rock crawler body has been designed as a competition level rock crawling body which allows clearance where you need when rc rock crawling. The tapered front and rear end allows for more articulation space and the side skirt acts as a skid plate when on the rocks.

Click to continue…

Axial AX10 Scorpion RTR – Ready to Crawl!

February 11, 2008 in Axial | no comments

Axial AX10 Scorpion RTR - Ready to Crawl!

Axial has just taken the extremely popular Axial AX10 Scorpion chassis and created a Ready-to-Run truck with two different configurations!

The factory configuration is a 20t pinion with the rear axles locked allowing you to attack the track at full speed. Want to take it slow? All you have to do is swap out the 20t pinion with the already supplied 14t pinion gear and install the front axle lockers (parts also included), this second setup allows you to get the RC rock crawling performance you’re looking for!

Click to continue…

Axial rear lock-out and straight axle

February 1, 2008 in Axial | no comments

Axial rear lock-out and straight axle

Axial in there never ending quest to make the Axial AX-10 Scorpion the best R/C rock crawler available has again released another cool upgrade – rear axle lock outs as well as a straight axle for the Axial Scorpion.

Click to continue…

Axial 2.2 8 Hole Beadlocks

December 5, 2007 in Axial | no comments

Axial 2.2 8 Hole Beadlocks

Axial has released another 2.2 beadlock wheel designed to fit the most popular rock crawler tires. Axial has improved the hex design for a better fit and strong wheel hex. All Axial wheels are made from their super strong composite material and the new Axial 2.2 8 hole beadlock wheels come in several finishes such as black, white, chrome and black chrome.

Axial 2.2 8 hole beadlock features:

  • Includes grey aluminum beadlock rings *(Optional colors and designs available)
  • Fits 12mm hex hubs
  • Width 36mm (1.4”)
  • Beadlock Diamter: 55mm (2.2”)

Part #: AX8097 – Black Axial 2.2 8-hole wheel
MSRP: $28.00

Axial AX10 Scorpion rear steering kit

December 2, 2007 in Axial | Comments Off

Axial AX10 Scorpion rear steering kit

Axial has just released a rear steering kit for their ever popular rc rock crawling chassis the Axial AX10 Scorpion. The new Axial AX10 rear steering kit includes all the hardware you need to convert your AX10 scorpion to four wheel steering which improves the steering radius of your rock crawler.

The Axial AX10 four wheel steering kit does require an additional servo and a 3 channel radio.

Part #: AX30492
MSRP: $35.00

Discuss the Axial AX10 Scorpion rear steering kit in our RC Rock Crawling forum!

More beadlock wheels from Axial

October 30, 2007 in Axial | no comments

Axial oversize narrow beadlocks

Axial has released another set of beadlock wheels, this time designed for large scale rock crawlers. The Axial oversize narrow beadlocks are made from strong composite material available in white, black, chrome, and black chrome finishes. A gray anodized 6061 aluminum bead-lock ring alone with all screws are also included.

The new Axial oversize narrow beadlocks fits 17mm and 14mm (with included adapter) hex hubs and fit Proline Moab XL’s tires.

Part #: AX8073 – Axial Chrome Oversize Narrow Rockster Bead Lock
MSRP: $42.00

Discuss the Axial oversize narrow bead-locks in our RC Rock Crawlers forum.